HKS 15004-AT010 Oil Cooler Kit For Toyota 86/Subaru BRZ
- Newly designed single tube type fitting.
- From engine bench tests and experience from D1 racing it is found that the oil pressure of the FA20 engine is extremely high compared to the conventional mass-produced engines. (Max oil pressure: over 12kgf/cm²) New single tube fitting withstanding the high oil pressure was newly designed and included in the kit.
- Including the pre-assembled hose, bracket, and air guide and locating the core in front of the radiator enable an easy installation. Also, there is no major modification required to the chassis.
- Special spacer and center bolts were designed exclusively for this kit to install the oil cooler attachment without modification.
- The thin 15-layer core improves the cooling performance and makes installation easier.
- This kit is applicable only to the NA engine.(A kit for the supercharged engine is under development)
■The following parts are included
Oil Cooler Core / S-type Attachment / Spacer / Center Bolt / Banjo / Banjo Bolt / Bracket / Air guide / Accessory Parts